From Official Temtem Wiki
Jump to navigation
Jump to search
This template is to be used on location pages, such as routes and landmarks, to show the Temtem that appear in a specific area of the location. As, currently, there is no area that has more than 4 Temtem that can be encountered the max number of Temtem that can be displayed is 5.
Parameters[edit]
{{Encounterbox
| LocationName =
| Area1Image =
| Area1AreaName =
| Area1Density =
| Area1Temtem1Name =
| Area1Temtem1Rate =
| Area1Temtem1Levels =
| Area1Temtem2Name =
| Area1Temtem2Rate =
| Area1Temtem2Levels =
| Area1Temtem3Name =
| Area1Temtem3Rate =
| Area1Temtem3Levels =
| Area1Temtem4Name =
| Area1Temtem4Rate =
| Area1Temtem4Levels =
| Area1Temtem5Name =
| Area1Temtem5Rate =
| Area1Temtem5Levels =
More areas if needed...
}}
- LocationName
- Used for cargo. Not displayed in the template.
- Area1Image
- Image of what the area where the Temtem can be located. Must put full file name including .png but not File:.
- Area1AreaName
- Used to change the name of the tab if needed. Do not include if area is not going to be renamed to prevent clutter. Defaults to "Area (area number)".
- Area1Density
- Value from 0-3 to describe sawn dnsity of an area. (0 = Very Common, 1 = Common, 2 = Rare, 3 = Ultra Rare)
- Area1Temtem1Name
- Name of the first Temtem in the first area. Must be filled for table to display the second, third, forth and fifth Temtem.
- Area1Temtem1Rate
- The percent rate of the first Temtem in the first area will appear. Can also be used if a Temtem is given as a gift or traded.
- Area1Temtem1Levels
- The levels the first Temtem in the first area will have.
- Area1Temtem2Name
- Name of the second Temtem in the first area. Must be filled for table to display the third, forth and fifth Temtem.
- Area1Temtem2Rate
- The percent rate of the second Temtem in the first area will appear. Can also be used if a Temtem is given as a gift or traded.
- Area1Temtem2Levels
- The levels the second Temtem in the first area will have.
- Area1Temtem3Name
- Name of the third Temtem in the first area. Must be filled for table to display the forth and fifth Temtem.
- Area1Temtem3Rate
- The percent rate of the third Temtem in the first area will appear. Can also be used if a Temtem is given as a gift or traded.
- Area1Temtem3Levels
- The levels the third Temtem in the first area will have.
- Area1Temtem4Name
- Name of the forth Temtem in the first area. Must be filled for table to display the fifth Temtem.
- Area1Temtem4Rate
- The percent rate of the forth Temtem in the first area will appear. Can also be used if a Temtem is given as a gift or traded.
- Area1Temtem4Levels
- The levels the forth Temtem in the first area will have.
- Area1Temtem5Name
- Name of the fifth Temtem in the first area.
- Area1Temtem5Rate
- The percent rate of the fifth Temtem in the first area will appear. Can also be used if a Temtem is given as a gift or traded.
- Area1Temtem5Levels
- The levels the fifth Temtem in the first area will have.
More areas can be added by changing the number after "Area" in the Parameter. A new tab will be added for the area, so long as the first Temtem in the second area is named.
Example of this: Area2Temtem1Name
Example[edit]
The Encounterbox for the Mawingu Islets would appear as such:
Area 1 (Density: Very Common) |
|
|
Area 4 (Density: Ultra Rare) |
|
|
Area 5 (Density: Ultra Rare) |
|
|
{{Encounterbox
| LocationName = Mawing Islets
| Area1Image = Mawingu Islets area1.png
| Area1Density = 0
| Area1Temtem1Name = Goty
| Area1Temtem1Rate = 50%
| Area1Temtem1Levels = 31 - 37
| Area1Temtem2Name = Kuri
| Area1Temtem2Rate = 50%
| Area1Temtem2Levels = 31 - 37
| Area2Image = Mawingu Islets area2.png
| Area2Density = 1
| Area2Temtem1Name = Goty
| Area2Temtem1Rate = 50%
| Area2Temtem1Levels = 31 - 37
| Area2Temtem2Name = Zephyruff
| Area2Temtem2Rate = 50%
| Area2Temtem2Levels = 32 - 38
| Area3Image = Mawingu Islets area3.png
| Area3Density = 2
| Area3Temtem1Name = Osuchi
| Area3Temtem1Rate = 75%
| Area3Temtem1Levels = 29 - 34
| Area3Temtem2Name = Volarend
| Area3Temtem2Rate = 25%
| Area3Temtem2Levels = 36 - 41
| Area4Image = Mawingu Islets area4.png
| Area4Density = 3
| Area4Temtem1Name = Zephyruff
| Area4Temtem1Rate = 50%
| Area4Temtem1Levels = 31 - 35
| Area4Temtem2Name = Skunch
| Area4Temtem2Rate = 30%
| Area4Temtem2Levels = 28 - 32
| Area4Temtem3Name = Droply
| Area4Temtem3Rate = 20%
| Area4Temtem3Levels = 32 - 37
| Area5Image = Mawingu Islets area5.png
| Area5Density = 3
| Area5Temtem1Name = Babawa
| Area5Temtem1Rate = 60%
| Area5Temtem1Levels = 30 - 37
| Area5Temtem2Name = Droply
| Area5Temtem2Rate = 40%
| Area5Temtem2Levels = 30 - 37
}}
The best practice would be to put the most common Temtem in the first slot and then go down the line. If two Temtem have the same rate, but them in numerical order.